PMF's Mach 15 Stainless Steel Wand is the Carpet Cleaning wand that every other is measured against. With a 15" wide suction head and 2" Stainless Steel vacuum tube, PMF Stainless Steel Mach 15 Wand was engineered for maximum vacuum conducive to maximim soil recovery. Starting at around 11.5 lbs, and extremely durable, PMF's Mach 15 Stainless Steel Wand is one of the most effective, easiest to use carpet cleaning wands in the Carpet Cleaning Industry.

Made with the highest quality components:

• The Mach 15 Stainless Steel Wand is made with the highest qualtiy components available to ensure years of trouble free and efficient service.
• Durable PMF V800EZ Valve with 800psi operating pressure is perfectly suited for truckmounts and high pressure portable carpet extractors. 
• PMF even built the Mach 15 Stainless Steel version with flexible & ultra durable stainless steel solution lines!

Designed for success!

• PMF's Mach 15 Stainless Steel wand has spray jets that blast cleaning solution as the perfect angle, moving soils across carpet fibers, rather than pressing them deeper within. Soils are loosened and left in a perfect position to be immediately extracted by the powerful 15" wide suction slot. 
• There is a solution strainer set inline before the trigger valve to stop debris before it causes a clog leading to needless downtime.
• Additionally, PMF installed stainless steel check valves on their Stainless Steel Wand to prevent dripping at the jets when the trigger valve is released.
• This PMF Mach 15 Stainless Steel wand has a low profile head which slips right underneath low slung furniutre, reducing the need to switch to a special tool.
• PMF's Mach 15 Stailness Steel wand comes standard with Stainless Steel Glides but offers upgrades to either Stainless Steel "Ski" Glides, and even Teflon Glides, the ultimate in reduced friction and relief from back strain! 
• The Mach 15 Stailess Steel incorporates a 2 inch Recovery Tube providing maximum soil recovery, and outstanding carpet cleaning results. 
• The 5 Jet Adjustable Manifold along with the 15" wide head allows for even, streak-free cleaning coverage and maximum conltrol over how the carpet cleaning solution gets applied to the carpet fibers.

If your looking for one of the most effective, most efficient, fastest cleaning, and easiest to use Carpet Cleaning Wand in the professional Carpet Cleaning industry, you've found it in PMF's Mach 15 Stainless Steel Carpet Cleaning Wand!  2nd only to the Ti version, this stainless carpet cleaning wand is the the fastest, lightest & most efficient carpet cleaning wand in the industry.

Product Details and Specs:

• 2" Stainless Steel Vaccum Tube
• 15" wide suction head
• 800 PSI Standard Trigger Valve
• Does NOT come with Brass High Pressure Hose Quick Connects (please see drop-down options if you need these)

Welded Components
PMF warranties all of their stainless steel welded tools against breakage of the welds from manufacture defects for a period of 1 year after purchase. PMF does not warrany obvious wear or mistratment of welded components.

Valves
Valve Bodies: PMF warranties all of their cast and fogred valve bodies from manufacturer defects.  PMF does not warranty normal wear of the internal valve body replacable parts. PMF does not warranty damage caused by mistreatment or freezing of the valve.
Valve Guts: PMF warranties only manufacture defects on the valve stems and related internal parts.  PMF does not warranty normal wear on valve stems or internal parts.  PMF does not warranty damage caused by mistreatment or freezine of the valve.

Shipping Costs
When a wand or tool is submitted to us within the 1 year warranty period, either Bulk Green Cleaners or PMF will email you a shipping label to return your package.  We will not supply you with a box so... Please save your box!  Providing damage is not found by PMF to be due to neglect, misuse or abuse, you will not need to reimburse us for shipping costs. However, if the damage is found not to be covered under warranty, PMF will fix the issue for a reasonable fee, and you will be responsible for all shipping costs incurred due to the repair(s).

Bulk Green Cleaners Staff Experience
We have used PMF tools for almost 20 years, and in that time, have found their welds to be impeccable and their tools to be extremely well built and of a design quality that is unsurpassable. If you are looking for the highest quality carpet wands and upholstery tools made for the professional carpet and upholstery cleaning industry, we highly recommend PMF tools.

Wand Glide Type (required):

Stainless Steel: This is the stock option that the wand comes with by default. It includes two SS Glides... one on each lip.
Stainless Steel Ski: This is the upgraded Stainless Steel 'Ski' Wand glide that further reduces friction for easier movement across carpeting.  It includes one regular Stainless Steel Glide and one Stainless Steel Ski Glide.
Teflon 'Tef' Glide:  This is PMF's signature Low Friction "Teflon" Wand Glide. Greatest friction reduction, this glide will reduce your labor from 10% - 40% (depending on carpet type) compared to the standard SS glides.  Note, the Teflon Glides can and do wear out with hard use.  Please see option to add an additional Teflon Wand Glide below at an incredible price.  This price only available when purchased with the wand.

Wand Valve Type (required):

V 800 EZ: This is the stock that the wand comes with by default. Easy pull, 800 psi valve.
V 1250 SS: Upgraded Stainless Steel, easy pull.  1250 psi.
GHP 5000 Gun: The GHP 5000 Gun Valve upgrades from the standard 800 psi (V800EZ) brass trigger valve, to a 5000 PSI gun style valve. Note, while the 800 & 1250 psi valves are mounted below the wand handle, the 5000 psi GHP fun valve is mounted above it. This in turn requires a different arm position as the wand handle will need to be help higher with arm bent more to maintain proper head contact with the carpet.  This may be ideal for taller individuals that normally have to drop their shoulder and/or bend their back slightly to mainatin proper contact, but may prove uncomfortable to those shorter individuals who find that the standard wand valves are at the perfect placement for proper cleaning positioning and minimal arm fatigue.  Please consider this before deciding wether this upgrade if for you, as the wand cannot be returned simply because the positioning is not ideal for you

Quick Connect (required):  This is the brass quick-connect that your high pressure solution hose will connect to near the handle of the wand.

Please note that if you do not choose one here, your wand will not come with one.
No Thanks, Don't Need One: Choose this option if you have your own and don't need one.

1/4" MPT Male QC (Brass)
1/4" MPT Female QC (Brass)
3/8" MPT Male QC (Brass)
3/8" MPT Female QC (Brass)

                

Rubber Dip Valve Trigger: (Optional) You can have your V800EZ or V1250 Valve Handle Custom Hot-Dipped into a liquid rubber which then hardens onto the valve trigger handle creating a softer, more comfortable valve trigger, thus increasing comfort & reducing fatigue.  
Simply select your chosen valve option to add this customization to your Mach 15 Wand order.

Valve Rebuild Kits: (Optional) Both are great to have on hand, so long as you continue to clean carpets, it is guaranteed that they will need replacement.

800 psi EZ Trigger Valve:  Rebuild kit for the guts of the V800EZ trigger valve.

O-ring only repair kit: R800-EZ
O-rings & stem repair kit: R800S-EZ
O-rings & stem & nut repair kit: R800SN-EZ

1250 psi SS Trigger Valve:  Rebuild kit for the guts of the V1250 Stainless Steel trigger valve.

O-ring only repair kit: R1250
O-rings & stem repair kit: R1250S
O-rings & stem & nut repair kit: R1250SN

5000 psi Gun Style Valve:  Rebuild kit for the guts of the GHP 5000 psi Gun Style Valve.

Complete kit: RVGP-HP

Additional Wand Glides: (Optional) If you want to be able to switch between more than one type of wand glide, or simply want to have an extra on hand if yours wears out, you can select from the options above to add to your order at time of wand purchase at these great prices!  Includes the following:

Stainless Steel: This is the stock option that the PMF Mach 15 Wand comes with by default. It includes two SS Glides... one on each lip.
Stainless Steel Ski: This is the upgraded Stainless Steel Wand glide that helps reduce friction for easier movement across carpeting. It includes one regular Stainless Steel Glide and one Stainless Steel Ski Glide.
Teflon (w/Adapter): Choose this option if you did not choose 'Teflon Wand Glides' under the required 'Wand Glide Type' drop-down above since you will need the adapter to attach the teflon glide to your Mach 15 Wand.
Teflon (Glides Only): Choose this option if you chose 'Teflon Wand Glides' under the required 'Wand Glide Type' drop-down above as you will already have the adapter kit.

Inline Strainers: (Optional) These are simply extra strainers to replace or swap with the one already installed just before the Mach 15 Wand Valve. Being able to simply remove the clogged stainer and replace with a fresh new one can reduce down-time on-the-job, while you can clean, repair the removed one back at the shop.
You can purchase in quantities of 1, 2 or 3 at time of Mach 15 Stainless Steel Wand Purchase.

HP Hose Repair (2pc Kit): (Optional) This is a 2 pc on-the-job High Pressure Solution Hose Quick Fix Repair Kit that can mend a Carpet Cleaning Solution Hose by simply cutting off the damaged part, inserting the barbed end of the 2pc Kit, and wrench tightening on. This innovative kit can save valualbe down time and costly repairs.  Note: You will need two solid, strong wrenches to get the job down.
You can select this in Quantities of 1, 2 or 3.